Your Cargo Control Specialist 

Kaptive Hook 

Technical Information and Specifications - Kaptive Hook

[ Winches ] [ Winch Track ] [ Cam Buckle ] [ Overcenter Buckle ] [ Kaptive Hook ] [ Ratchet Buckle ] [ Floor Chain ] [ Tie Down ] [ Tie Down Calculation ] [ Kinedyne Web Threading ]

Kaptive Hook Anchoring Pin Installation Information
Cut pins to length to fit between side frame and rub rail. Position with flat end of oval at top, at least 5” from stake pocket. Weld all around pin end on side frame, weld top and bottom of pin end on rub rail. Use 1/4” fillet welds with 1/8” minimum penetration for steel, 3/8” fillet welds for aluminum.

Your Cargo Control Specialist