|
 |
[ Grab Hook ] [ Rubber Rope ] [ Chain Assembly ] [ Chain & Ratchet Binder ] [ Floor Chain Tie-Downs ] [ Floor-Chain Tie-Down Plates ] [ Web Protectors ] [ Corner Protectors ] [ Strap Winder ] [ Ratchet Buckle Handle Extension ] [ C & J Hooks ]
10002 - Standard C
 
C Hook
All C and J hooks are flame cut from 5/8" steel. They are designed to
fit flat on truck trailer side frames for easy welding and will accept
D-rings, web loops, cable or rope.
Breaking Strength: 20,000 lbs., 9075 kgs.
Working Load Limit: 6,670 lbs., 3032 kgs.
Note: Breaking Strength is dependent upon strength of the weld.
Minimum welding requirements are 1/4" fillet weld around entire
contact surface, and 1/8" penetration.
Please Call For Pricing
Weight: 0.5 lbs., 0.2 kgs
|
| |
10003 - Standard J
 
J Hook
All C and J hooks are flame cut from 5/8" steel. They are designed to
fit flat on truck trailer side frames for easy welding and will accept
D-rings, web loops, cable or rope..
Breaking Strength: 20,000 lbs., 9075 kgs.
Working Load Limit: 6,670 lbs., 3032 kgs.
Note: Breaking Strength is dependent upon strength of the weld.
Minimum welding requirements are 1/4" fillet weld around entire
contact surface, and 1/8" penetration.
Please Call For Pricing
Weight: 0.5 lbs., 0.2 kgs
|
| |
10004 - Special J
 
Special J Hook
All C and J hooks are flame cut from 5/8" steel. They are designed to
fit flat on truck trailer side frames for easy welding and will accept
D-rings, web loops, cable or rope..
Breaking Strength: 20,000 lbs., 9075 kgs.
Working Load Limit: 6,670 lbs., 3032 kgs.
Note: Breaking Strength is dependent upon strength of the weld.
Minimum welding requirements are 1/4" fillet weld around entire
contact surface, and 1/8" penetration.
Please Call For Pricing
Weight: 0.7 lbs., 0.3 kgs.
|
|
|
C & J Hooks 